How To Operate The Memory Stick Player; Listening To Mg Memory Stick - Fujitsu ECLIPSE CD8455 Owner's Manual

High-power "pro customize" cd/ms receiver with mp3/wma decoder and remote
Table of Contents

Advertisement

How to operate the Memory Stick player

Music data recorded on "MG Memory Stick" with ATRAC3 (an audio compression
technology) can be played on this deck. Recording from music CD to the MG
Memory Stick is also possible. The following explanation for the operation is made
assuming that the MG Memory Stick has already been inserted.
First press the [DISC MS] button for less than one second to switch to the disc
mode. It is assumed here that a MG Memory Stick has already been loaded into the
deck.

Listening to MG Memory Stick

Press the [DISC MS] button for less than one second to
switch to the Memory Stick player mode.
Disc mode will switch from CD player ➔ Memory Stick player in
order each time the button is pressed.
If an external CD changer is connected, each additional press of the
[MS] button will switch modes from CD changer 1 ➔ CD changer 2 ➔
Memory Stick player ➔ CD player.
A changer or player with no discs loaded will be skipped.
● Artist name and music title (track titles) can be displayed when
they are recorded on the MG Memory Stick. A maximum of 10
characters (1 byte alphabets, numeric or symbols) can be
displayed.
● Music data recorded with MP3/WMA and ATRAC3 Plus cannot
be played.
[DISC MS] button

How to operate the Memory Stick player

93
VII

Advertisement

Table of Contents
loading

Table of Contents