Fujitsu ECLIPSE CD8455 Owner's Manual page 126

How to operate the Sound Adjustment Mode
● Automatic parametric equalizer correction
This can be used to automatically correct distortion in frequency
characteristics (peaks and dips) based on the results of
measuring the frequency characteristics inside the vehicle.
Automatic parametric equalizer correction is carried out in the
following steps.
Time alignment and crossover adjustment
(Refer to
and
In addition, adjustment and settings can be carried out using
the ECLIPSE web site.)
Frequency characteristic measurement
(Refer to
pages 133 and 158 for details.)
Saving sound quality data
(The folders and files that are required for E-iSERV sound
effect customizations are created automatically when the data
is written to the Memory Stick. Refer to
frequency characteristics
ECLIPSE web site accessing
(Access the following URL: http://www.e-iserv.jp)
Automatic parametric equalizer adjustment
(Follow the instructions given on the web site.)
Correction data downloading
(Follow the instructions given on the web site.)
Correction data reading
(Refer to "Importing Sound Data" on page 146 and 170 for details.)
"
Time alignment adjustment
"
Crossover adjustment
"
Measuring/display frequency characteristics
"
on pages 136 and 161
"
on pages 142 and 163 for details.
"
Measuring/display
"
on pages 133 and 158 for details.)
126
"
on