Table of Contents
Advertisement
ESN security operating procedure
How to operate the ACC security
ACC security involves using Memory Stick security to record a security
code, and then when the ignition switch is turned to OFF and back to
ACC, the operation of all buttons is disabled.
Check that the unit is in standby.
Once a security code has been recorded, press the
[FUNC] button and button [5] simultaneously for more
than two seconds.
The ACC security function will be activated. Press the [FUNC]
button and button [5] simultaneously for two seconds or more again
to cancel the ACC security function.
● If the vehicle's battery is disconnected at times such as during
● When ignition switch is turned OFF and back to ACC, the
servicing, ACC security will be canceled.
operation all button is disabled. If this happen, resume normal
operation. (Refer to "How to resume normal operation (ESN
security lock out)" on page 35.)
[FUNC] button
Button [5]
38
Advertisement
Table of Contents
