Table of Contents
Advertisement
How to operate the Sound Adjustment Mode
[AUDIO CONTROL] button
When updating software, press and hold the [AUDIO CONTROL]
button to measure and display the frequency characteristics.
Buttons [1] to [6]
Press the [
] or [
This adjusts the frequency level.
[ ] button:
Increases level.
[ ] button:
Decreases level.
Press the [6] button to select the Q curve pattern.
Each time the button is pressed, the Q curve changes in the
following order.
MIDDLE
NORMAL
SHARP
Repeat the operations in steps
change the settings for each channel and band.
The frequencies that have been adjusted for either the
channel or band cannot be selected.
Hold down a button, [1] to [5], for more than two
seconds to preset a value.
The preset value is overwritten by the value set using the
above steps.
The time alignment and crossover adjustments will also be
stored at this time.
Press the [RTN] button.
At this time, other adjustments can also be made in pro mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
[SOUND] button
] button.
SHARP
156
[ ] button
[RTN] button
[ ] button
MIDDLE
SLOW
SLOW
to
to
Advertisement
Table of Contents
