Tuning To A Station - Fujitsu ECLIPSE CD8455 Owner's Manual

[FM AM] button
First, press the [FM AM] button to start tuner operation.
There are automatic and manual methods for setting stations in memory.
The receiver will accept up to 24 stations in memory: 6 in AM and 18 in FM
(6 each for FM1, FM2 and FM3.) (Initial setting)

Tuning to a station

Press the [FM AM] button for less than one second to
switch to the desired FM or AM bands.
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order
each time the button is pressed.
If the optional SIRIUS satellite radio tuner unit is connected, radio
mode will be switched between the satellite radio mode and FM AM
radio mode by pressing the [FM AM] button for more than one second.
Turn the [SEL] button to the left or right to tune to a
station.
Turn to the right: Tunes to higher frequencies.
Turn to the left:
Press the [ ] or [
search.
[ ] button: Starts searching toward higher frequencies.
[ ] button: Starts searching toward lower frequencies.
At times, it may be difficult to maintain optimum reception because the
antenna affixed to your vehicle is in motion constantly (relative to the
broadcast antenna), encountering continuous variation in the received
radio signals' strength. Other factors affecting reception include
interference from natural obstacles, sign posts, etc.
How to operate the tuner with an optional HD Radio tuner connected (U.S.A. only)
Tunes to lower frequencies.
] button to start the automatic station
197
[ ] button
[SEL] button [ ] button
XIII