Download Print this page

Fujitsu CD5425 Owner's Manual

Esn e5 high power "full-face" cd receiver with mp3 decoder.
Hide thumbs

Advertisement

CD5425
ESN E5 High-Power "Full-Face" CD Receiver with MP3 Decoder
We appreciate your purchase of this receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.

Advertisement

   Related Manuals for Fujitsu CD5425

   Summary of Contents for Fujitsu CD5425

  • Page 1

    CD5425 ESN E5 High-Power "Full-Face" CD Receiver with MP3 Decoder We appreciate your purchase of this receiver. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.

  • Page 2

    Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the CD5425. They show safe and correct ways to handle the product so as to prevent personal injury to you, others and to avoid property damage.

  • Page 3

    Warning ● Before drilling holes in a vehicle for installation, you must confirm the locations of pipes, tanks, electrical wiring, and other vehicle systems and components to ensure that there will be no interference or contact. In addition, you must also apply rust prevention and leak prevention measures at the drilling area.

  • Page 4

    Warning ● Some equipment uses batteries. Never install equipment where young children can get access to batteries. If a battery is swallowed, seek medical attention immediately. ● When vehicle is moving, never take your eyes off the road to make adjustments to the equipment. You must pay attention to the road to avoid accidents, do not let the operation or adjustment of the equipment distract you from proper vehicle operation.

  • Page 5

    Caution ● Wiring and installing this equipment requires expertise and experience. Professional installation is recommended. Consult with your dealer or a professional installer. Incorrect wiring may damage the equipment or interfere with safe vehicle operation. ● Use only the accessory parts as specified. Using other parts may cause damage to the equipment or cause parts to fall or fly off the equipment.

  • Page 6

    Caution ● Avoid hot surfaces when wiring equipment. High temperatures may damage wiring, causing shorts, arcing and fires. ● When changing the installation location for this equipment, please consult the dealer where you bought it for safety reasons. Expertise is necessary for removal and installation. ●...

  • Page 7

    Caution ● Do not short, disassemble or heat the batteries, or place them in fire or water. Fire and injuries may result from battery rupture and leakage. ● Store the remote control in a place away from direct sunlight, high temperatures, and high moisture levels.

  • Page 8: Table Of Contents

    Table of Contents Operating precautions................. 12 Notes on operation......................12 About compact discs ..................... 13 About cleaning a CD ..................... 15 Names of controls and parts .............. 16 ESN security operating procedure............. 17 About ESN ........................17 How to operate the ESN (Key CD) security ..............18 How to program the Key CD...................

  • Page 9

    Others ........................... 49 Adjustment of the front panel angle ................ 49 How to operate the CD player............. 50 Listening to CDs......................50 Advancing to the next track or returning to the beginning of the track being played ..51 Fast Forward/Rewind ....................51 Playing the beginning of tracks (SCAN)................

  • Page 10

    How to operate the AREA SHOT function (U.S.A. only) ....70 About the AREA SHOT ....................70 To use the AREA SHOT function ................70 Reading the AREA SHOT data ..................71 Changing the AREA SHOT mode ................. 73 Using the AREA SHOT mode ..................74 Switching between guidance points................

  • Page 11

    Switching between displays when receiving HD Radio..........93 HD Radio reception settings ..................93 How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) ............95 About SIRIUS satellite radio ..................95 Selecting the radio mode ....................96 Selecting a channel.......................

  • Page 12: Operating Precautions

    Operating precautions Operating precautions <Your CD5425 will perform well over a long period of time through correct handling and care.> Notes on operation ● For your safety, play only at volume levels that allow outside sounds to be heard. ● We recommend using with this player a disc with the logo shown to the left.

  • Page 13: About Compact Discs

    Operating precautions About compact discs ● The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause deteriorated sound quality or intermittent playback. Observe the following precautions to ensure high quality sound performance: ●...

  • Page 14

    Operating precautions About brand new CDs About CD accessories ● You may notice that some brand new ● Do not use accessories discs are rough around the center (stabilizers, protective seals, laser hole or outside edge. Remove the lens cleaners, etc.) sold rough edges with the side of a...

  • Page 15: About Cleaning A Cd

    Operating precautions About borrowed CDs About irregularly-shaped CDs ● Do not use a CD with glue or remnants ● Specially-shaped CDs, like heart- of adhesive tape or labels. They may shaped or octagonal CDs, cannot be cause the CD to get stuck inside or played.

  • Page 16: Names Of Controls And Parts

    Names of controls and parts Names of controls and parts Front view With the front open Never place an object or rest your hands or the like on the front panel. Opens/closes front panel and ejects CD. ] button [AUDIO CONTROL] button Adjusts volume and performs other functions. [DISC] button Switches between disc modes and AUX mode.

  • Page 17: Esn Security Operating Procedure

    ESN security operating procedure ESN security operating procedure About ESN This deck incorporates ESN (ECLIPSE Security Network). The ESN is a security system which disables all deck functions when the power is restored if the deck is stolen from the vehicle. Once the ESN is activated, removing power to the deck or vehicle will activate the security feature.

  • Page 18: How To Operate The Esn (key Cd) Security

    ● If a security is activated, programming the Key CD is not available. Press the [CD ] button. The front panel opens; The CD5425 is now ready for your Key CD in the CD slot. Insert the CD into the slot.

  • Page 19: How To Cancel The Key Cd

    A [SEC] message appears, then in two seconds it will change to [DISC]. Press the [CD ] button. The front panel opens; The CD5425 is now ready to your Key CD in the CD slot. If a CD has already been inserted, a [SEC] message appears, and then the front panel opens and the CD is ejected.

  • Page 20: How To Change The Key Cd

    [SEC] message will appear for two seconds. Thereafter, message changes to [DISC] and the press the [CD ] button, then the CD5425 is ready to accept your Key CD into the slot. Insert your Key CD. If the correct CD is inserted, an [OK] message will appear for two seconds and the CD will begin playing.

  • Page 21: What Happens If An Incorrect Cd Is Inserted

    ESN security operating procedure What happens if an incorrect CD is inserted? After the 5th incorrect attempt, the display reads [HELP] for five seconds. After the [HELP] message will appear for five seconds, serial number will appear. Press the [CD ] button to close the front panel. Press button [6], then the [FUNC] button, and hold them for five seconds.

  • Page 22: How To Turn The Security Indicator On/off

    ESN security operating procedure [FUNC] button Button [2] How to turn the security indicator on/off Once ESN security is activated, the indicator flashes whenever the vehicle's ignition switch is turned off, warning potential thieves that the unit is protected. However, if do not want this visible deterrent, it may be turned off.

  • Page 23: How To Read The Electronic Serial Number

    [ESN] appears on the display, followed by an eight-digit number; this number is your electronic serial number (ESN). You may use this number to identify your Eclipse CD5425 in the event of theft recovery.

  • Page 24: Basic Operation

    Basic operation Basic operation [PWR] button This section covers basic operating procedures. For additional details, please refer to the sections on specific functions. Turning the power on and off When the power is turned on, the state used when the power was turned off such as CD and tuner playback is restored.

  • Page 25: Listening To Cd

    Basic operation ] button [DISC] button Listening to CD Press the [CD ] button. The front panel opens. Insert a CD into the disc slot, label side up. The CD will immediately start playing. When a CD is already loaded, press the [DISC] button to switch to the CD mode.

  • Page 26: Listening To The Tuner

    Basic operation [ ] button [FM AM] button Buttons [1] to [6] [SEL] button [ ] button Listening to the tuner Press the [FM AM] button. This will turn the tuner on. Press the [FM AM] button for less than one second to switch to the desired FM or AM bands.

  • Page 27: Adjusting Audio Volume

    Basic operation [MUTE] button [AUDIO CONTROL] button Adjusting audio volume Turn the [AUDIO CONTROL] button to the left or right. Turn to the right: Increases the volume. Turn to the left: Decreases the volume. Press the [MUTE] button for less than one second to cut the volume or restore it instantly.

  • Page 28: Switching Audio Control Modes

    Basic operation [AUDIO CONTROL] button Switching audio control modes Various audio control modes may be fine-tuned using this procedure. Press the [AUDIO CONTROL] button for less than one second to select the item to be adjusted. Modes will switch in the order shown below each time the button is pressed.

  • Page 29: Mid (middle) Mode

    Basic operation [AUDIO CONTROL] button MID (MIDDLE) Mode Adjusts middle level. Mid mode can be adjusted for each source (CDP/CDC, FM and AM). Turn the [AUDIO CONTROL] button to the left or right. Turn to the right: Emphasizes medium sounds. Turn to the left: Softens medium sounds.

  • Page 30: Svc (source Volume Control) Mode

    Basic operation [AUDIO CONTROL] button SVC (Source Volume Control) Mode You can set different volume levels for each audio mode. The volume for the initial FM mode (default value: 40) is used as a reference for storing the differences in volume that have been set for each audio mode.

  • Page 31: Loud Mode

    Basic operation [AUDIO CONTROL] button Turn the [AUDIO CONTROL] button to the left or right. Turn to the right: Increases the SVC setting value. Turn to the left: Decreases the SVC setting value. The volume difference can be set within a range of -10 to +20. If the battery terminals have been disconnected because of a reason such as vehicle maintenance, the SVC settings will return to their default values.

  • Page 32: Recording User Presets For The Equalizer

    Basic operation [SOUND] button [AUDIO CONTROL] button Recording user presets for the equalizer The adjustment values for BASS, MIDDLE and TREBLE settings made in the audio control mode can be stored. The stored adjustment values can be called by changing the equalizer mode. For detail, see "Changing the equalizer mode"...

  • Page 33: How To Operate The Sound Adjustment Mode

    Basic operation How to operate the Sound Adjustment Mode About Sound Adjustment Mode The system has several features that allow you to adjust the acoustic characteristics inside the cabin. In the Sound Adjustment Mode, the following characteristics can be adjusted. Crossover The frequency band that is stored by audio media such as CDs is a fairly wide range from 20 Hz to 20 kHz, and it is difficult for a single...

  • Page 34

    Basic operation ● The crossover function is a filter that allocates specified frequency bands. ● A high-pass filter (HPF) is a filter that cuts out frequencies that are lower than the specified frequency (bass range) and allows higher frequencies (treble range) to pass through. ●...

  • Page 35: Making Changes With Sound Adjustment Mode

    Basic operation [SOUND] button [SEL] button Making changes with Sound Adjustment Mode Press the [SOUND] button for more than one second. The mode will change to sound adjustment mode. Turn the [SEL] button to select a setting item. When the button is turned, the setting item changes in the following order and selected item is highlighted.

  • Page 36: Disabling The Cross Over (f, R) Function

    Basic operation [SOUND] button [SEL] button [RTN] button Disabling the Cross Over (F, R) function Front and rear speaker HPF (High Pass Filter) can be turned ON/ OFF. Turn the [SEL] button to select ON or OFF. Cut off frequency is fixed at 80 Hz and slope is fixed at 18 dB/oct. Adjustments cannot be made.

  • Page 37: Disabling The Cross Over (nf) Function

    Basic operation [SOUND] button [SEL] button [RTN] button Disabling the Cross Over (NF) function Woofer (non-fader output) LPF (Low Pass Filter) can be turned ON/ OFF. Turn the [SEL] button to select ON or OFF. Cut off frequency is fixed at 80 Hz and slope is fixed at 18 dB/oct. Adjustments cannot be made.

  • Page 38: Non-fader Phase Selection (non-f Phase)

    Basic operation [SOUND] button [SEL] button [RTN] button Non-fader phase selection (NON-F Phase) The merging of sound between the front and rear speakers and the woofer can be improved by selecting the phase. Switch the phase to a phase which lets the speakers combine without any disharmony.

  • Page 39: Making Changes With Display Adjustment Mode

    Basic operation [DISP] button Making changes with Display Adjustment Mode This function allows adjustment of display contrast. Press the [DISP] button for less than one second. The display adjustment mode is activated.

  • Page 40: Contrast Adjustment

    Basic operation [SEL] button [DISP] button [RTN] button Contrast adjustment Adjust the display contrast to the best level in accordance with the angle of viewing. Press the [SEL] button. Enters contrast adjustment mode. Turn the [SEL] button to adjust contrast. When the button is turned, the contrast level changes in the following order.

  • Page 41: Making Changes With Function Mode

    Basic operation [FUNC] button [SEL] button Making changes with Function Mode A variety of settings can be changed. Press the [FUNC] button for less than one second. The function mode is activated. Turn the [SEL] button in either direction to display setting items for selection.

  • Page 42: Disabling The Guide Tone Feature (for Button Operation)

    Basic operation [FUNC] button [SEL] button [RTN] button Disabling the guide tone feature (for button operation) The receiver is set at the factory to emit a beep tone in response to button operation. The guide tone feature may be disabled in the following procedure: Turn the [SEL] button to select GUIDE TONE.

  • Page 43: Clock Display On/off

    Basic operation [FUNC] button [SEL] button [RTN] button Clock display on/off Switches the clock display to ON/OFF. Turn the [SEL] button to select CLOCK DISP. Press the [SEL] button. The clock display ON/OFF mode is activated. Turn the [SEL] button to select ON or OFF. Press the [SEL] button.

  • Page 44: Setting The Time

    Basic operation [FUNC] button [SEL] button [RTN] button Setting the time This receiver uses the 12-hour display notation. Turn the [SEL] button to select CLOCK ADJ. Press the [SEL] button. The clock adjustment mode is activated. Press the [SEL] button to display the item to be selected for adjustment.

  • Page 45: Setting The Steering Switch Function (u.s.a. Only)

    CD5425 is installed. The ECLIPSE website (E-iSERV) provides software that enables steering switch operation even with the installation of the deck. Import this software into your CD5425. Depending on your vehicle’s make and model, material downloaded from the website may not be compatible with your steering switch.

  • Page 46

    Basic operation [FUNC] button ] button [SEL] button Reading steering switch data The steering switch data that has been download from E-iSERV (website) to a CD-R can be loaded into the deck and saved there. Press the [FUNC] button for less than one second. The function mode is activated.

  • Page 47

    Basic operation ● The deck can only import file from CD-Rs that have been written in root directories. Automatic creation XXXXXXX.ssw File extension ● Disc formats that may be used are as follows: • CD-ROM (MODE 1) • CD-ROM (MODE2_FORM 1) *CD-ROMs written in MODE2_FORM2 cannot be read.

  • Page 48

    Basic operation Compatibility with various switches Displays the compatibility of the system’s modes and the steering switch. Mode Button operation Switch name Tuner Disc mode Short tap TUNE UP TRACK UP – SEEK+ Hold FAST UP – SEEK UP Short tap TUNE DOWN TRACK DOWN –...

  • Page 49: Others

    Basic operation [TILT] button ] button Others Adjustment of the front panel angle Display angle can be adjusted. Push and hold the [TILT] button with the display completely closed. While pushing the [TILT] button, the display will gradually open. When the display has opened to the desired angle, release the [TILT] button.

  • Page 50: How To Operate The Cd Player

    How to operate the CD player How to operate the CD player [DISC] button First press the [DISC] button for less than one second to switch to the disc mode. It is assumed here that a CD has already been loaded into the unit. Listening to CDs Press the [DISC] button for less than one second to switch to the CD player mode.

  • Page 51: Advancing To The Next Track Or Returning To The Beginning Of The Track Being Played

    How to operate the CD player [SEL] button [ ] button [4 SCAN] button [ ] button Advancing to the next track or returning to the beginning of the track being played Turn the [SEL] button to the left or right. Turn to the right: Advances to the next track.

  • Page 52: Repeating The Same Track (repeat)

    How to operate the CD player [5 RPT] button [6 RAND] button Repeating the same track (REPEAT) Press the [5 RPT] button to repeat the track being played. To cancel, press the [5 RPT] button again. Playing tracks in random order (RANDOM) Press the [6 RAND] button to play the tracks in random order.

  • Page 53: Ejecting The Disc

    How to operate the CD player ] button Ejecting the disc Press the [CD ] button. The front panel opens and the disc is ejected. Remove the disc and press the [CD ] button. The front panel closes. If left alone for 15 seconds after the disc ejection, the front panel closes after the BEEP sound.

  • Page 54: Displaying Cd Text

    How to operate the CD player [DISP] button Displaying CD TEXT Only the built-in CD player supports CD TEXT. It can not be displayed with the optional CD changer. If the CD came with a logo shown below, it is recorded with a disc title and track titles.

  • Page 55: How To Operate The Mp3 Player

    How to operate the MP3 player How to operate the MP3 player About MP3 The making of MP3 files by recording from sources such as broadcasts, records, recordings, videos and live performances without permission from the copyright holder for uses other than personal enjoyment is prohibited. What is MP3? MP3 (MPEG Audio Layer III) is a standard format for audio compression technology.

  • Page 56: Media

    How to operate the MP3 player Media Media capable of playing MP3 includes CD-R and CD-RW discs. Compared to CD-ROM media commonly used for music discs, CD- R and CD-RW discs are fragile in high temperature/high humidity environments and one section of the CD-R and CD-RW may become incapable of playback.

  • Page 57: File Names

    How to operate the MP3 player File names Only files with the MP3 file extension ".mp3" can be recognized as MP3 and played. Be sure to save MP3 files with the ".mp3" file extension. The "MP" letters of the file extension will be recognized whether entered as uppercase letters or lowercase letters.

  • Page 58: Listening To Mp3 File

    How to operate the MP3 player [DISC] button Button [3] Listening to MP3 file Press the [DISC] button for less than one second to switch to the CD player mode. This starts MP3 file play. If an external CD changer is connected, each additional press of the [DISC] button will switch modes from CD changer 1 ➔...

  • Page 59: Advancing To The Next Track (file) Or Returning To The Beginning Of The Track (file) Being Played

    How to operate the MP3 player [SEL] button [ ] button [RTN] button Buttons [1 ] and [2 [ ] button Advancing to the next track (file) or returning to the beginning of the track (file) being played Turn the [SEL] button to the left or right. Turn to the right: Advances to the next track (file).

  • Page 60: Playing The Beginning Of Files (scan)

    How to operate the MP3 player [4 SCAN] button [5 RPT] button Playing the beginning of files (SCAN) Press the [4 SCAN] button. Press the button briefly to play just the first 10 seconds of each song for all the files in the same layer of the folder being played. Pressing the button until [FOLD SCAN] is displayed will play just the first 10 seconds of the first song in each folder.

  • Page 61: Playing Files In Random Order (random)

    How to operate the MP3 player [5 RPT] button [6 RAND] button [DISP] button Playing files in random order (RANDOM) Press the [6 RAND] button. Press the button briefly to randomly play the files in the same layer as the folder being played. Pressing the button until [ALL RAND] is displayed will randomly play the files in all the folders.

  • Page 62: How To Operate The Tuner

    How to operate the tuner How to operate the tuner [ ] button [FM AM] button [SEL] button [ ] button First, press the [FM AM] button to start tuner operation. There are automatic and manual methods for setting stations in memory.

  • Page 63: Entering Stations Into Memory Automatically (the Automatic Preset Mode: Asm)

    How to operate the tuner [FM AM] button Buttons [1] to [6] [SEL] button Entering stations into memory automatically (The automatic preset mode: ASM) Press the [FM AM] button for less than one second to switch to the desired FM or AM bands. Radio bands will switch from FM1 ➔...

  • Page 64: Manually Setting Stations Into Memory

    How to operate the tuner [FM AM] button Buttons [1] to [6] [SEL] button Manually setting stations into memory This section covers the setting of stations in memory under the numbered buttons. Press the [FM AM] button for less than one second to switch between FM and AM.

  • Page 65: Preset Station Scan

    How to operate the tuner Buttons [1] to [6] [SEL] button Preset station scan This function enables reception of all the stations in the preset buttons for five seconds each. Press the [SEL] button for less than two seconds. [P SCAN] will appear on the display, and stations stored under preset buttons [1] through [6] will be played for five seconds each.

  • Page 66: Changing The Reception Sensitivity For Automatic Scanning

    How to operate the tuner [FM AM] button Button [1] Changing the reception sensitivity for automatic scanning The deck lets you select the reception sensitivity to be used for automatic scanning of stations. The two sensitivity modes available for this deck are AUTO mode and DX mode.

  • Page 67: Changing The Radio Band Location

    How to operate the tuner [FM AM] button Button [3] Changing the radio band location The location for the radio bands used between the North American region and the Asia/Australia/Latin region can be switched. The default setting is USA (North America). When an optional HD Radio tuner unit is connected, radio band location is set to USA.

  • Page 68: Fm Reception Characteristics

    How to operate the tuner FM reception characteristics In general, FM has much better tonal quality than AM. However, FM and FM stereo reception encounter several characteristic problems not encountered with AM. FM is more difficult to receive than AM in a moving vehicle. The following are explanatory notes on what to expect from FM reception and on how to get satisfactory performance.

  • Page 69: Reception Area Of Fm Broadcasts

    How to operate the tuner Reception area of FM broadcasts A home receiver can catch weak FM stereo signals through the use of a tall, directional or ultra-sensitive antenna. In a moving vehicle, the area for good reception is limited because of varying conditions encountered while driving, including the types and heights of broadcast antenna structures, signal strength, engine noise, etc.

  • Page 70: How To Operate The Area Shot Function (u.s.a. Only)

    With the AREA SHOT function, road information such as the direction of travel and the street names of turn intersections can be downloaded from the ECLIPSE website (E-iSERV), imported into the CD5425, and shown on the display. To use the AREA SHOT function...

  • Page 71: Reading The Area Shot Data

    How to operate the AREA SHOT function (U.S.A. only) [FUNC] button [SEL] button Reading the AREA SHOT data The Area Shot data that has been downloaded from E-iSERV (web site) to a CD-R can be loaded into the deck and saved there. Press the [FUNC] button for less than one second.

  • Page 72

    How to operate the AREA SHOT function (U.S.A. only) Press the [SEL] button. The selected file will be saved. While the files are being read [READING...] will appear. When reading has finished, [COMPLETED] will appear on the display and then it will return to the display for selecting the function mode. ●...

  • Page 73: Changing The Area Shot Mode

    How to operate the AREA SHOT function (U.S.A. only) [MUTE] button Changing the AREA SHOT mode Press the [MUTE] button for more than one second. The AREA SHOT mode is activated. Information such as intersection street names and the direction of turns are displayed in text and with arrows.

  • Page 74: Using The Area Shot Mode

    How to operate the AREA SHOT function (U.S.A. only) [DISP] button [ ] button [RTN] button [ ] button Using the AREA SHOT mode By manually switching between guidance points, both previous and next guidance points can be confirmed during guidance. Intersection street names and the direction of turns are shown on the display in text and with arrows.

  • Page 75: Display Arrows

    How to operate the AREA SHOT function (U.S.A. only) Display Arrows Arrows for indicating turn directions are displayed as follows. Diagonally Diagonally forward right left rear Right Left Diagonally Diagonally rear right forward left Depending on driving conditions, arrows indicate the following: Expressway Intersection Traffic...

  • Page 76: How To Use An Optional Remote Control

    How to use an optional remote control How to use an optional remote control Precautions in use of the remote control ● Be careful when handling the remote control, especially because it is small and light. Dropping or striking it hard may damage it, wear out the battery or cause a malfunction.

  • Page 77: Turning The Power On/off

    How to use an optional remote control [PWR] button Remote-control light receptor ] button ] button [MUTE] button Turning the power on/off When the power is turned on, the state used when the power was turned off such as CD and tuner playing is restored. Press the [PWR] button.

  • Page 78: Switching Playback Modes

    How to use an optional remote control [MODE] button [TU] button [DISC] button [BAND] button [AUX] button Switching playback modes Press the [MODE] button. Press the button to switch modes in the following sequence: Tuner Disc Modes can be switched by pressing the following buttons: [TU] button : The tuner mode is activated.

  • Page 79: Selecting A Station (manually Or Automatically)

    How to use an optional remote control [DISC] button [BAND] button [ PRESET CH ] buttons [ TUNE · SEEK ] buttons Selecting a station (manually or automatically) A short press of the button will allow manual station tuning. Pressing for more than one second will start automatic tuning.

  • Page 80: Advancing To The Next Track Or Returning To The Beginning Of The Track Being Played

    How to use an optional remote control [DISC] button [BAND] button DISC ] buttons TRACK ] buttons Advancing to the next track or returning to the beginning of the track being played Press the [ TRACK ] button. ] button: Advances to the next track. ] button: Returns to the beginning of the track being played.

  • Page 81: How To Play Mp3

    How to use an optional remote control [DISC] button [BAND] button DISC ] buttons TRACK ] buttons How to play MP3 Switching disc modes Press the [DISC] button. The disc mode is activated. Press the [BAND] or [DISC] button. When one or two CD changers are connected, press the [BAND] or [DISC] button to change modes from CD player ➔...

  • Page 82: Replacing The Battery

    How to use an optional remote control Replacing the battery To prevent accidents, store batteries out of the reach of children. If a child has swallowed one, consult a doctor immediately. Use two AAA size batteries. Remove the back cover of the remote control unit by gently pressing and sliding it in the direction indicated by the arrow.

  • Page 83

    How to use an optional remote control ● Be extremely careful not to swallow the battery. ● The battery life is approximately one year. If the remote control unit does not operate correctly or if the button lamp gets dim, replace the batteries.

  • Page 84: How To Operate The Receiver With An Optional Cd Changer Connected

    How to operate the receiver with an optional CD changer connected How to operate the receiver with an optional CD changer connected [DISC] button [SEL] button [ ] button [ ] button This section covers the operation of an optional CD changer that is connected to the receiver.

  • Page 85: Playing The Beginning Of Tracks (scan)

    How to operate the receiver with an optional CD changer connected [4 SCAN] button [5 RPT] button Playing the beginning of tracks (SCAN) Press the [4 SCAN] button. Pressing the button for less than one second causes the changer to move up to the next track and play it for 10 seconds, then move up to the next track and play it for 10 seconds, and so on, on one CD, until the button is pressed again.

  • Page 86: Playing Tracks In Random Order (random)

    How to operate the receiver with an optional CD changer connected [5 RPT] button [6 RAND] button Button [1 Button [2 Playing tracks in random order (RANDOM) Press the [6 RAND] button. Pressing on the button for less than one second causes the changer to play the tracks on the currently playing CD in random order, until the button is pressed again.

  • Page 87: Specifying A Cd To Play

    How to operate the receiver with an optional CD changer connected [SEL] button Buttons [1] to [6] Specifying a CD to play A CD of your choice is directly selectable out of the loaded discs. Press the [SEL] button for less than one second. Press a button from [1] to [6].

  • Page 88: How To Operate The Tuner With An Optional Hd Radio Tuner Connected (u.s.a. Only)

    How to operate the tuner with an optional HD Radio tuner connected (U.S.A. only) How to operate the tuner with an optional HD Radio tuner connected (U.S.A. only) About HD Radio If the optional HD Radio (High Definition Radio) tuner unit is connected, terrestrial digital broadcasts can be received.

  • Page 89: Tuning To A Station

    How to operate the tuner with an optional HD Radio tuner connected (U.S.A. only) [ ] button [FM AM] button [SEL] button [ ] button First, press the [FM AM] button to start tuner operation. There are automatic and manual methods for setting stations in memory.

  • Page 90: Entering Stations Into Memory Automatically (the Automatic Preset Mode: Asm)

    How to operate the tuner with an optional HD Radio tuner connected (U.S.A. only) [FM AM] button Buttons [1] to [6] [SEL] button Entering stations into memory automatically (The automatic preset mode: ASM) Press the [FM AM] button for less than one second to switch to the desired FM or AM bands.

  • Page 91: Manually Setting Stations Into Memory

    How to operate the tuner with an optional HD Radio tuner connected (U.S.A. only) [FM AM] button Buttons [1] to [6] [SEL] button Manually setting stations into memory This section covers the setting of stations in memory under the numbered buttons.

  • Page 92: Preset Station Scan

    How to operate the tuner with an optional HD Radio tuner connected (U.S.A. only) Buttons [1] to [6] [SEL] button Preset station scan This function enables reception of all the stations in the preset buttons for five seconds each. Press the [SEL] button for less than two seconds. [P SCAN] will appear on the display, and stations stored under preset buttons [1] through [6] will be played for five seconds each.

  • Page 93: Switching Between Displays When Receiving Hd Radio

    How to operate the tuner with an optional HD Radio tuner connected (U.S.A. only) [FUNC] button [SEL] button [DISP] button [RTN] button Switching between displays when receiving HD Radio During digital reception, the name of the station being received and other information can be displayed.

  • Page 94

    How to operate the tuner with an optional HD Radio tuner connected (U.S.A. only) Turn the [SEL] button to select AUTO or OFF. In the [AUTO] setting, the selection is switched between digital and analog reception automatically. In areas where digital reception is not possible, reception is automatically switched to analog to avoid loss of reception.

  • Page 95: How To Operate The Tuner With An Optional Sirius Satellite Radio Tuner Connected (u.s.a. Only)

    How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) About SIRIUS satellite radio If the optional SIRIUS satellite radio tuner unit is connected, satellite radio broadcast can be received.

  • Page 96: Selecting The Radio Mode

    How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) [SEL] button [ ] button [FM AM] button [ ] button The receiver will accept up to 24 stations in memory. Selecting the radio mode Press the [FM AM] button for more than one second.

  • Page 97: Category Selection

    How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) [ ] button [FM AM] button Buttons [1] to [3] [ ] button Category selection The channel can be selected from among categories such as POP and ROCK. Consult the SIRIUS website for details of categories.

  • Page 98: Manually Setting Channels Into Memory

    How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) [FM AM] button Buttons [1] to [6] [SEL] button Manually setting channels into memory This section covers the setting of channels in memory under the numbered buttons.

  • Page 99: Preset Channel Scan

    How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) [SEL] button Buttons [1] to [6] [DISP] button Preset channel scan This function enables reception of all the channels in the preset buttons for five seconds each. Press the [SEL] button for less than two seconds.

  • Page 100: Others

    Others Others [DISC] button Connecting portable audio players (to the AUX jack) Use a commonly available accessory cord. With a jack for AUX cord (sold separately), portable audio players and other external inputs can be connected to the system. Turn on the portable audio player and start its play function.

  • Page 101: Changing Auxiliary Input Sensitivity

    Others [FUNC] button [SEL] button [RTN] button Changing auxiliary input sensitivity The sensitivity of the auxiliary mode can be changed. Press the [FUNC] button for less than one second. THe function mode is activated. Turn the [SEL] button to select AUX Sensitivity. The selected item is highlighted.

  • Page 102: User Registration Key Display

    Others [DISP] button User Registration Key display User Registration Key is your CD5425's unique ID. In order to use the ECLIPSE website (E-iSERV), a 16-digit User Registration Key is necessary. Check that the deck is in standby mode. Press the [DISP] button for more than one second.

  • Page 103: If You Have A Question

    If you have a question: If you have a question: [RESET] button First check the items mentioned below before attempting to troubleshoot problems. If a problem occurs, for instance when the unit does not respond to any button presses, or the display doesn't work correctly, press the [RESET] button using a paper clip or similar item.

  • Page 104: Displayed Information (for Troubleshooting)

    If you have a question: Displayed information (for troubleshooting) The information listed in the chart below is displayed to show the status of the CD, AREA SHOT function, CD changer and SIRIUS satellite radio tunner. Refer to the chart for the appropriate action. Information Contents Explanation and remedial action to take INFO 2...

  • Page 105

    If you have a question: Remedial action Refer Mode Problem Causes to take to page Turn up the volume Is the volume control up sufficiently? control. Is the muting function in effect Cancel the muting (MUTE)? (MUTE) function. Dead or Readjust the fader and Is the fader or balance control set far weak sound...

  • Page 106

    If you have a question: Remedial action Refer Mode Problem Causes to take to page The disc cannot be inserted. Is an extra label or seal Do not apply labels or applied to the disc? seals to the disc. The disc is ejected as soon as it is inserted.

  • Page 107: Specifications

    Specifications Specifications <GENERAL> Power Supply 14.4V DC (11-16V) Current Drain Dimensions (W x H x D) In-Dash Unit 7" x 2" x 6-1/8" (178 x 50 x 155mm) Mass (weight) Approx. 1.4kg Usage temperature range -20°C to +65°C (-4°F to +149°F ) Storage temperature range -40°C to +85°C (-40°F to +185°F ) <FM TUNER>...

  • Page 108

    Specifications <AUDIO AMPLIFIER> Power Output 14W x 4 (20Hz~20kHz, 1% THD, 4Ω, Vcc=14.4V) Max. 50W x 4 Output Level/Impedance 5V/55Ω line-out impedance Tone Action Bass: ±12dB at 80Hz Middle: ±12dB at 630Hz Treble: ±12dB at 10kHz Loudness +10dB at 100Hz/+6.5dB at 10kHz...

  • Page 109: Before Installation

    Before installation Before installation ● Note ● Be sure to disconnect the vehicle battery's negative terminal before installing the receiver. Components Item Q'ty Main unit Mounting sleeve Side bracket Rear bracket Bezel Bushing Self-tapping screw (6 x 16 mm) Stud bolt Flat head screw (red: 5 x 8 mm) Hex-head bolt (red: 5 x 8 mm) Hex-head bolt (6 x 20 mm)

  • Page 110: Mounting Instruction

    Mounting instruction Mounting instruction Mounting the main unit –If installing the main unit by the mounting sleeve– Insert the mounting sleeve into the opening in the vehicle dash board or console box. Use a screwdriver or the like to bend the tabs in the mounting sleeve to secure the mounting sleeve.

  • Page 111

    Mounting instruction Mount the stud bolt to the main unit. Insert the main unit into the mounting sleeve until it locks in place. Fasten the rear of the main unit using either method [A] or [B]. Some automobiles may be equipped to secure the back of the main unit using the stud bolt and supplied rubber support.

  • Page 112

    Mounting instruction –If installing the main unit by the side brackets of the vehicle– Remove the pockets and any other accessories from the center cluster to make room for the main unit. Remove the mounting side brackets for the pocket. CENTER CLUSTER POCKET SCREWS...

  • Page 113: Names Of Lead Wires And Destinations

    Mounting instruction Names of lead wires and destinations (refer to Page 115) ● Caution ● Never connect the power supply to the speaker leads, otherwise it causes damage to the main unit. ● Note ● To prevent unconnected leads from shorting out, insulate them by wrapping their tips with electrical tape.

  • Page 114: System

    Mounting instruction System Note: Adjust the external amplifier’s input level. CD5425 CD5425 CD5425 HDR105 HD RADIO TUNER CD CHANGER CD5425 21010 CD5425 EXTERNAL PRODUCT MP3 PLAYER, MD PLAYER, etc.

  • Page 115

    Mounting instruction...

  • Page 116

    Mounting instruction...

  • Page 117

    Mounting instruction...

  • Page 118

    Mounting instruction...

  • Page 119

    Mounting instruction...

  • Page 120: How To Contact Customer Service

    How to contact customer service How to contact customer service Should the product require service, please contact your nearest Eclipse dealer. <U.S.A/CANADA> DIVISION OF FUJITSU TEN CORP. OF AMERICA 19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502 Phone: (310) 327-2151 <AUSTRALIA> FUJITSU TEN (AUSTRALIA) PTY LTD.

  • Page 121

    How to contact customer service <KOREA> Transpectra Co., Ltd. 115-16 nonhyun dong kangnam ku Seoul, Korea. Phone: 02-540-4595 Fax: 02-2-540-4666 HYUNDAI AUTONET Co., LTD. 1st FL. Namhyoung Bldg, 746-23 Yeoksam-Dong, Kangnam-Ku, Seoul, Korea 135-080 Phone: 02-508-6001 Fax: 02-2-508-6067 <TAIWAN> Sentrek Taiwan, LTD. 1, 9F, Lane 155, Section 3, Peishen RD., Shenkeng, Taipei Hsien, Taiwan, R.O.C.

  • Page 122

    Memo • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •...

  • Page 123

    IMPORTANT RECORD YOUR “KEY CD” HERE… STORE YOUR “KEY CD” ALONG WITH YOUR OWNER’S MANUAL TAKE THIS OUT.

  • Page 124

    CUSTOMER NOTICE Please retain this booklet and write in the serial number of your CD5425 for identification. The serial number is labeled or stamped on the chassis. Serial No. FUJITSU TEN LIMITED Contact:FUJITSU TEN CORP. OF AMERICA "ECLIPSE" is a registered trademark of 19600 So.

This manual also for:

Eclipse cd5425

Comments to this Manuals

Symbols: 0
Latest comments: