[AUDIO CONTROL] button
Buttons [1] to [6]
Press the [
This adjusts the frequency level.
[ ] button:
[ ] button:
Press the [6] button to select the Q curve pattern.
Each time the button is pressed, the Q curve changes in the
following order.
NORMAL
Repeat the operations in steps
change the settings for each channel and band.
The frequencies that have been adjusted for either the
channel or band cannot be selected.
Hold down a button, [1] to [5], for more than two
seconds to preset a value.
The preset value is overwritten by the value set using the
above steps.
The time alignment and crossover adjustments will also be
stored at this time.
Press the [RTN] button.
At this time, other adjustments can also be made in pro mode.
Press the [SOUND] or [RTN] button to exit sound
adjustment mode.
When updating software, press the [AUDIO CONTROL] button to
measure and display the frequency characteristics.
How to operate the Sound Adjustment Mode
[SOUND] button
] or [
] button.
Increases level.
Decreases level.
MIDDLE
SHARP
SHARP
153
[ ] button
[RTN] button
[ ] button
MIDDLE
SLOW
SLOW
to
IX
to