Entering Stations Into Memory Automatically (The Automatic Preset Mode: Asm) - Fujitsu ECLIPSE CD8455 Owner's Manual

[FM AM] button
Entering stations into memory automatically
(The automatic preset mode: ASM)
Press the [FM AM] button for less than one second to
switch to the desired FM or AM bands.
Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order
each time the button is pressed.
Press the [SEL] button for more than two second until a
beep is heard.
The automatic preset mode starts.
The [ASM ON] indicator on the screen flashes, and stations are
automatically entered in memory under buttons [1] to [6].
These buttons are called preset buttons.
● Pressing the preset buttons ([1] to [6]) allows you to make one-
● When a new station is set in memory, the station previously set
● If there are fewer than six receivable stations, the stations set in
If the vehicle's battery is disconnected (for repairs to the vehicle or for
removing the receiver), all stations in memory will be lost. In such a
case, set stations in the memory again.
Buttons [1] to [6]
touch station selections. The frequency of selected station is
indicated on.
in memory will be deleted.
the remaining buttons will be retained.
[SEL] button
107
How to operate the tuner
VIII