Changing Area Shot Screens - Fujitsu ECLIPSE CD8455 Owner's Manual

How to operate the AREA SHOT function (U.S.A. only)

Changing AREA SHOT screens

When a GPS unit is connected, the following operations are available.
● When your vehicle enters the display/map range of the
● When vehicle enters the map range of a guidance point while
Press the [RTN] button.
In the AREA SHOT mode, the audio screen can be accessed.
Pressing the button repeatedly allows you to switch back and
for the between the AREA SHOT screen and the Audio
screen.
guidance point, a blinking marker will appear to indicate the
position of your vehicle.
Vehicle position marker
When vehicle position marker leaves the map range while
traveling along the guidance route, the vehicle position marker
disappears. Push [
order to display vehicle position marker, your vehicle must be
within the map display area.
the audio operation screen is displayed, [Map coverage area]
will be appear on the display. Press [RTN] to return to the AREA
SHOT screen. Pressing the audio operation button turns off
[Map coverage area] message and allows operation of the
audio system.
] to display the next guidance point. In
182