Osd Control Options - Elo TouchSystems 1928LM Manual

OSD Control Options

Control
Contrast
Brightness
V-Position
H-Position
Recall Defaults
Color Balance
Audio Volume
Sharpness
Phase
Clock
OSD H-Position
OSD V-Position
OSD Time
Auto-Adjust
OSD Language
Input Select
Descripción
Increase or decrease contrast.
Increase or decrease brightness.
Moves the screen up or down.
Moves the screen left or right.
Returns the monitor to its default settings.
Press ▲ or ▼ and "Select" button to select 9300, 6500, 5500, 7500 and
USER. Only when selecting USER, can you make adjustments to the
R/G/B content. Press Select to restore to factory default setting.
Adjust audio vlume of OSD menu.
Adjust Sharpness.
Increase or decrease the snow noise of the image after auto adjustment is
made.
The dot clock is fine-adjusted after Auto Adjust.
Moves the OSD position horizontally on the screen. When the "Select"
button and the ▲ button are pressed, the OSD control menu will move to
the right side of the screen. Likewise, when the "Select" button and the
▼button is pressed, the OSD control menu will move to the left side.
Moves the OSD position vertically on the screen. When the "Select"
button and the ▲ button is pressed, the OSD control menu will move to
the top side of the screen. Likewise, when the "Select" button and the
▼button are pressed, the OSD control menu will move to the lower side.
Adjusts the time of OSD icon stays on monitor.
(1) Press Auto to enable this function. The Auto-Adjust will
automatically adjust V-Position, H-Position, Clock and Clock-Phase.
(VGA only)
(2) Indicates the current resolution, H-Frequency and V-Frequency.
(DVI and VGA.)
Select from English, French, German, Spanish, Japanese, Italian,
Chinese, Polish and Swedish.
Select video source from DSUB analog to DVI digital.
6