Default Settings; Default Setting Items; Changing The Default Settings; Table 1-11. Default Setting Items - Epson Stylus Pro Service Manual

Product Description

1.4.3 Default Settings

The printer can save some printer setting parameters that define its functions at initialization. You can
change these parameters using the printer's default-setting mode.

1.4.3.1 Default Setting Items

In default-setting mode, you can change settings listed in the table below. Activate default-setting mode
by holding down the Economy/Condensed button while turning on the printer.
Menu
Contents
Character table
Print direction
Network I/F mode
Auto line feed
Loading position
Interface mode
Auto I/F wait mode

Table 1-12. Characteristics of Print Direction Mode

Item
Black and White Printing
Throughput and quality is
Auto
Throughput is best.
Bi-D
Print quality may be down.
Throughput is worse.
Uni-D
Print quality is better.

Table 1-13. Printing Direction and ESC U Command

Default Setting
Mode
^
ESC U0 ESC U1 None ESC U0 ESC U1 None ESC U0 ESC U1 None
Character mode
Auto
®
(for MS-DOS )
Raster graphics
mode (for
Bi-D
™
Windows )
Note: Printing direction is controlled by driver in Windows environment.

1.4.3.2 Changing the Default Settings

To change the printer's default settings:
1-14

Table 1-11. Default Setting Items

Selects the character table
Controls the print direction. (See Tables 1-12 and 1-13)
Auto
Bi-D
Uni-D
Off: For normal environments.
On: For network environments.
On: Valid
Off: Invalid
3.0/8.5 mm (0.12/0.33 in.)
Auto I/F mode
Parallel I/F mode
Serial I/F mode
Optional I/F mode
10/30 seconds
Throughput is better.
Color quality with special paper is worse.
better.
(Color correction depends on the printing direction.)
Throughput is better.
Color quality with special paper is worse.
(Color correction depends on the printing direction.)
Throughput is worse.
Color quality is best.
Auto
Auto Auto
Uni-D Auto
Stylus Pro Service Manual
Description
Color (CMYK) Printing
Bi-D
Bi-D Uni-D Bi-D
Bi-D Uni-D Bi-D
Factory
Setting
—
—
Off
—
3.0 mm
—
10 sec.
Uni-D +
Uni-D Uni-D Uni-D
Bi-D Uni-D Uni-D
Rev.B