Table of Contents
Advertisement
Mode combination
Two of the SelecType modes (NLQ and emphasized) can be com-
bined to create an impressive
tion, turn your printer off and back on and follow the instructions
below :
1. See that the ON LINE and READY lights are on.
2. Press the
ON LINE
3. Press the
ON LINE
Since one is
the
Press the
4.
ON LINE
once again.
This makes a total of two times, and thus sets
sized also.
5. Press the
LF
Press the
6.
ON LINE
Now print your sample document or run your sample program. If
your printing appears in
emphasized Near Letter Quality
as you see here, you have successfully combined the two modes. If
you get any other results, turn your printer off and back on and then
try the steps again.
You can combine other modes using the same technique, but some
modes will not mix with others. Table 2-2 shows which modes can be
combined. A dot in a box indicates that the two modes can be com-
bined.
effect.
and
buttons at the same time.
FF
button once and then the
code for NLQ, you have now set the
button one more time and then the
button to return the panel to its standard operation.
button to put the LX-90 on-line.
If you
want to see
FF
LX-90
LX-90
the
this combina-
button once.
for NLQ.
button
FF
for empha-
11
Advertisement
Table of Contents
