First Graphics Program - Epson Printer Interface Cartridge Operation Manual

Figure
With this numbering system, any combination of the eight pins
adds up to a decimal number between 0 and 255, and no numbers are
duplicated.
Now that you know the principles of Epson graphics, you're ready
for two simple exercises, more densities, and then something more
complex as a basis for writing your own programs.

First Graphics Program

Your first graphics exercise could be a program that prints a single
column of dots, but it is difficult to see the pattern in a single column of
dots, so your first graphics program prints the same pattern 40 times.
The first line is the code for 40 columns of single-density graphics.
As usual, the example is in BASIC, but you can adapt it to the pro-
gramming language you prefer.
NEW
10 LPRINT CHR$(27)"K"CHR$(40)CHR$(0);
The second line is the data that is printed as pin patterns. Be sure
that you type in the semicolons in both lines:
20 FOR X=1 TO 40: LPRINT CHR$(74);: NEXT X
That's it. Run the program to see the result below. Although it is not
as interesting as the examples at the beginning of this chapter, it does
allow you to see exactly how the mode works.
8-2. Calculating numbers for pin patterns
49