Table of Contents
Advertisement
3.
Assembling the Stand
3.1
MG 55-3 stand assembly
3
6
There are two stand sets with different table plates available for the
669 class:
Stand set
MG 55-3
MG 56-3
4
–
Assemble the stand according to the illustration.
–
Fasten the pedal 2 to the stand brace 1.
–
Mount the stand brace 1 to the stand.
–
Align the pedal after you have assembled the complete machine.
–
Screw on the holder for the oil can 3.
–
Turn the adjusting screw 4 to ensure a secure mount on the stand.
–
The stand must be resting with all four feet on the floor.
Version
not separated, with or without cut-out
separated, hinged
2
1
Advertisement
Table of Contents
