Assembly - Char-Broil TRU-Infrared 463251012 Product Manual

ASSEMBLY

1
Place bottom shelf upside down. Insert Caster Pin into the caster mounting plate to lock it in place, shown A.
Spin the caster clockwise into the threads on the bottom shelf until secure. Remove the Caster Pin and repeat for remaining
casters. Make sure the two locking casters are secured at the rear and the non-locking casters are secured at the front.
After all 4 casters are secure, remove the Caster Pin and save for future maintenance.
Locking caster
Bottom shelf
2
Attach side panels to bottom shelf using three
1/4-20x1/2" screws per panel.
IMPORTANT: Panel with large hole must
Be on Right side of bottom shelf.
Left side panel
Make sure side panels
are pushed as far to the
rear of bottom shelf as
possible before fully
tightening screws.
Fixed caster
Front
Rear
Magnet
A
Caster pin
1/4-20x1/2" screw
Right side panel
(with large hole)
13