Assembly - Char-Broil 463720910 Product Manual

ASSEMBLY

1 Left leg
Place upper leg as shown. NOTE: Left front and left back legs do not have leg extenders. In front, attach upper leg,
side brace and left front leg (curve) with #10-24x1-1/4'' machine screw and #10-24 flange nut. In back, attached the left
back leg (straight) to upper leg.
Attach support bracket in the third hole from bottom of leg with two hinge pins and two hitch pins (A) .
Hitch Pin
Qty.2
Hinge Pin
Left Back Leg
Qty.2
Hitch Pin
Hinge Pin
Right leg
2
Place upper leg as shown. Attach upper leg and right front leg (curve) with #10-24x1-1/4'' machine screws and #10-24
flange nuts. Then attach upper leg and right back leg (straight).
Attach support bracket with #10-24x1-1/4'' machine screws and #10-24 flange nuts.
Right Back Leg
(Straight)
Leg Extender
(Straight)
Upper Leg
Left Front Leg
(Curve)
Right Front Leg
(Curve)
#10-24x1-1/4''
Machine Screw
Qty.1
#10-24
Flange Nut
Qty. 1
A
#10-24
#10-24x1-1/4''
Flange Nut
Machine Screw
Qty. 3
Qty.3
17