Tuning To A Sub Channel (Sps) - Eclipse CD5030 Owner's Manual

About the optional unit
Select a setting item by pressing
5
the [ ] or [ ] button.
The HD Radio switches in the order
shown below each time the buttons
are pressed.
AUTO1 ↔ AUTO2 ↔ OFF ↔ AUTO1
↔
AUTO1:
Preferentially
broadcasting that is in the receivable
state. In areas where digital reception
is not possible,
automatically switched to the analog
broadcasting reception mode to avoid
loss of reception.
AUTO2:
Preferentially
broadcasting that is in the receivable
state. In areas where digital reception
is not possible,
automatically switched to the analog
broadcasting reception mode to avoid
loss of reception. Automatic scanning
is available
broadcasting. For automatic tuning,
see page 40.
OFF:
Receives only analog broadcasting.
The display shows "DIGITAL" while a
digital broadcasting is being received.
This is cleared
reception.
90
receives digital
reception is
receives digital
reception is
only for digital
during analog

Tuning to a sub channel (SPS)

When a station selected in the HD Radio has sub
channels (SPS), "P_" (_: number of sub
channels) is shown on the display, and you can
select sub channels.
Press the [ ] or [ ] button for less
1
than one second.
Each time the button is pressed, the
sub channel changes.
[ ]:
Advances to the next sub channel.
[ ]:
Returns to the previous sub channel.