How to operate the CD/MP3/WMA player
About compact discs
Operation
• The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface.
A scratch on the recorded surface or a badly warped disc may cause deteriorated sound quality
or intermittent playback. Observe the following precautions to ensure high quality sound perfor-
mance:
CAUTION
1
2
Do not load multiple discs at a time.
• Do not leave an ejected disc in the disc slot for very long; the disc may
warp. Discs should be stored in their cases and kept away from high
temperature and humidity.
• Do not adhere a piece of paper or tape. Do not write on or scratch
either side of a disc.
• Discs spin at a high speed inside the main unit. Keep cracked or
warped discs out of the player to avoid damaging the main unit.
• Avoid touching the recorded surface when handling a disc; handle
discs by their edges.
• This main unit can play a 12cm disc only. No 8cm disc can be played.
How to operate the CD/MP3/WMA player
IV
21
Need help?
Do you have a question about the ECLIPSE CD5030 and is the answer not in the manual?
Questions and answers