Disconnecting The Main Unit And The Portable Device; Displaying Device Information For The Main Unit - Eclipse CD5030 Owner's Manual

Operation
Disconnecting the main unit and the
portable device
In the BT Audio Setting selection
1
mode, select "Disconnect" by
pressing the [ ] or [ ] button.
Press the [ENTER] button.
2
The "Disconnect ?" message appears
on the display.
Press the [ENTER] button.
3
ATTENTION
If you do not want to cancel the connection,
press [ /BAND] button. The BT Audio Setting
selection mode will be activated again.
When the disconnection has been
4
completed, the "COMPLETED"
message appears on the display.
The main unit is disconnected from the
portable device.
(The and
display. However,
while Bluetooth
connected.)
38
are cleared from the
will not disappear
hands-free
Displaying device information for
the main unit
The name of the device (main unit), the
passcode and the BD ADD (device address)
can be displayed.
In the BT Audio Setting selection
1
mode, select "Device INFO" by
pressing the [ ] or [ ] button.
Press the [ENTER] button.
2
The name of the device and the
passcode are displayed.
ATTENTION
Each time the [SCREEN/TEXT] button is
pressed, the display changes in the following
way.
Device name / Passcode ↔ BD ADD (Device
address)
Press the [ /BAND] button.
3
The BT Audio Setting selection mode
will be activated again.
is