Multi-Harmonizer Settings (Harmonizer); Non-Fader Settings (Non-F Setting); Non-Fader Output Settings (Output); Non-Fader Phase Settings (Phase) - Eclipse CD5030 Owner's Manual

Various Settings
Multi-harmonizer settings
(Harmonizer)
This function uses harmonic synthesis to restore
the high-frequency component that is lost as a
result of the compression process, so that
fresher sound can be obtained during MP3/
WMA, USB memory playback.
Select "Multi-Harmonizer" by
1
pressing the [ ] or [ ] button.
2
Press the [ENTER] button.
The harmonizer setting
activated.
Select a setting item by pressing
3
the [ ] or [ ] button.
When the button is pressed, the
setting item changes in the following
order.
↔ OFF ↔ Hi ↔ Low ↔
Hi:
High effectiveness
Low:
Low effectiveness
The selected settings will take effect.
74
Non-fader settings (Non-F
Setting)
• Non-Fader Output (Output)
Non-Fader Output can be stereo or mono.
Select the method that matches the output
method for the sub-woofer system that is
connected to the main unit.
• Non-fader phase (Phase)
The merging of sound between the front and
rear speakers and the woofer can be
improved by selecting the phase. Switch the
phase to a phase which lets the speakers
combine without any disharmony.
mode is
Select "Non-Fader" by pressing
1
the [ ] or [ ] button.
2
Press the [ENTER] button.
The
activated.

Non-Fader Output settings (Output)

Press the [ ] button to select
1
"Output".
Select "Stereo" or "Monaural" by
2
pressings the [ ] or [ ] button.
[ ]:
Stereo
[ ]:
Monaural

Non-fader phase settings (Phase)

Press the [ ] button to select
1
"Phase".
Select "Normal" or "Reverse" by
2
pressing the [ ] or [ ] button.
[ ]:
Normal
[ ]:
Reverse
non-fader setting mode is