Delete A Registered Cell Phone - Eclipse CD5030 Owner's Manual

Operation
Searching for cell phones to be
registered
In the Phone Setting selection
1
mode, select "Registration" by
pressing the [ ] or [ ] button.
Press the [ENTER] button.
2
"NO ENTRY" will be displayed if
available. If not, a double beep will be
heard if the phone registration memory
is not available or full.
Select "Device Search" by
3
pressing the [ ] or [ ] button.
Press the [ENTER] button.
4
"Searching" will be displayed.
ATTENTION
"FAILED" will be displayed if cell phone cannot
be registered. Repeat Search procedure.
Select a device name of cell phone
5
you want to register by pressing
the [ ] or [ ] button.
Each time the [SCREEN/TEXT] button
is pressed, the display changes in the
following way, and you can register the
cell phone using the device address
(BD ADD) as well. Device name ↔
Device address (BD ADD) If the
device name cannot be obtained
during the search, "UNKNOWN" is
displayed.
Press the [ENTER] button.
6
"Waiting" will be displayed.
Use the cell phone to input the
7
passcode.
The default passcode is 1234.
48
When the registration has been
8
completed, "COMPLETED" will be
displayed.
The cell phone has been registered.
( and appear on the display.)
"FAILED" will
registration is not successful. Repeat
Search procedure.

Delete a registered cell phone

In the Phone Setting selection
1
mode, select "Select Phone" by
pressing the [ ] or [ ] button.
Press the [ENTER] button.
2
Select the cell phone you want to
3
delete from memory by pressing
the [ ] or [ ] button.
Press the [ENTER] button.
4
Select "Delete" by pressing the [ ]
5
or [ ] button.
Press the [ENTER] button.
6
The "DELETE ?" message appears on
the display to confirm the cancellation.
Press the [ENTER] button.
7
"COMPLETED" will be displayed
8
when deletion is successful.
ATTENTION
When a cell phone is deleted, all data
associated will also be deleted (including
history, preset dial, and phonebook) from the
main unit.
be displayed if