Registering Phone Number In The Phonebook; Setting Auto Answer; Setting The Ring Tone - Eclipse CD5030 Owner's Manual

Operation
Registering phone number in the
phonebook
Phone numbers can be registered in the
phonebook of the main unit by transferring the
phonebook data from the cell phone.
A maximum of 500 phone numbers can be
registered for each cell phone.
In the Phone Setting selection
1
mode, select "Phonebook" by
pressing the [ ] or [ ] button.
Press the [ENTER] button.
2
The "DATA
appears on the display.
Transmit phonebook data using
3
your cell phone.
"COMPLETED" will be displayed
4
when data transfer is successful.
"FAILED" will be displayed if data
transfer is not successful. Repeat the
transmit procedure.
ATTENTION
• If there is no space remaining in the main
unit for phonebook data, the "MEMORY
FULL" message appears on the display
when an attempt is made to transfer data
from the cell phone.
• Some cell phones cannot transfer all of the
phonebook data at once. In this case,
transfer one data at a time.
• If the battery terminal of the vehicle is
disconnected, the
registered in the main unit will be deleted.
50
Receiving" message
phonebook data

Setting Auto Answer

When there is an incoming call, the phone can be
set to answer it automatically five seconds after
the phone starts ringing.
Select "Auto Answer" by pressing
1
the [ ] or [ ] button in the Phone
Setting selection mode.
Press the [ENTER] button.
2
Select "ON" or "OFF" by pressing
3
the [ ] or [ ] button.
ON:
Auto Answer is activated
OFF:
Auto Answer is disabled
ATTENTION
The default setting for Auto Answer is OFF
(Auto Answer is disabled).

Setting the ring tone

The ring tone can be set on or off for incoming
calls. Ring tone is set ON by default.
In the Phone Setting selection
1
mode, select Ringtone by pressing
the [ ] or [ ] button.
Press the [ENTER] button.
2
Select "ON" or "OFF" by pressing
3
the [ ] or [ ] button.