About Brand New Cds; About Cd Accessories; About Borrowed Cds; Ejecting The Disc - Eclipse CD5030 Owner's Manual

Operation

About brand new CDs

Rough Edges
Ballpoint pen
Rough Edges
Flakes
Recorded surface

About CD accessories

About borrowed CDs

• Do not use a CD with glue or remnants of adhesive tape or labels. They may cause the CD to get
stuck inside or damage the main unit.

Ejecting the disc

OKAY
22
• You may notice that some brand new discs are rough around the
center hole or outside edge. Remove the rough edges with the side of
a ballpoint pen, etc. Rough edges may prevent proper loading in the
main unit. Flakes from the rough edges may also stick to the recorded
surface and interfere with playback.
• Do not use accessories (stabilizers, protective seals, laser lens
cleaners, etc.) sold for "improving sound performance" or "protecting
CDs." The changes in CD thickness or outside dimensions made by
these accessories may cause problems in the player.
• Please be sure NOT to attach any ring-shape protector (or other
accessory) to your discs. Those protectors are commercially available
and said to protect disc and to improve sound quality (and
antivibration effect), but they can do more harm than good in regular
uses. The most common problems are disc insertion, disc ejections,
and won't play problems due to the protector ring that came off in the
disc mechanism.
• When removing the ejected disc, pull it straight out along the slot.
Removing the disc in a downward or upward angle may scratch the
recorded surface of the disc.