Table of Contents
Advertisement
10.7 Cutting pressure
10.8 Cutting duration
44
Standard checking
So as to keep the strain on all components as low as possible
and in order to increase the lifespan of the cutting knife, the cutting
pressure can be adjusted.
Depending on the sewing material and the material thickness, the
cutting pressure should be adjusted to be as low as possible.
However, it has to be adjusted in such a way that the material is cut
safely.
The cutting pressure is associated with different cutting lengths in the
program.
Correction
–
See operating instructions chapter 10.5.4
Standard checking
It is possible to set the cutting duration, to avoid an unnecessary long
cut on the material to be processed thus allowing a clean result.
Correction
–
See chapter 29.4.4
Hide quick links:
Advertisement
Table of Contents
