Adjusting The Locking Plate - Duerkopp Adler 580 Service Instructions Manual

8.5

Adjusting the locking plate

2
3
26
1
Caution: Danger of injury!
Turn the main switch off.
Adjust the locking plates only with the machine switched off.
Standard checking
The locking plates 1 have to be adjusted in such a way that the
stops 3 of the clamping plates abut centrally and as tight as possible.
–
Insert the clamping plates.
–
Check the position of the locking plates 1 to the stop 3.
Correction
–
Adjust the locking plate 1 with the special spanner 2 (in the
accessories).
1
3