Threading The Gimp Thread (Versions 579-121000, 579-141000 And 579-151000 Only) - Duerkopp Adler 579 Operating Instructions Manual

3.6 Threading the gimp thread (subclasses 579-121000, 579-141000 and 579-151000
only)
579-121000 and 579-151000
Caution: danger of injury
The gimp thread may only be threaded with the machine switched off or in
threading mode (see "threading mode" section).
Thread the gimp thread as shown in the illustrations.
–
Leave about 25 mm of bobbin thread hanging out of the gimp hole
–
in the throat plate.
579-141000
1
15