Oil Lubrication - Duerkopp Adler 530 Service Instructions Manual

7.

Oil lubrication

Caution: Danger of injury !
Oil can cause skin eruption.
Avoid a longer contact with the skin.
Wash yourself thoroughly after a contact.
ATTENTION !
The handling and disposal of mineral oils is subject to legal
regulations.
Deliver used oil to an authorized collecting station.
Protect your environment.
Be careful not to spill any oil.
Oil the button sewing automat exclusively with the lubricating
oil DA-10 or an equivalent oil with the following specification:
–
Viscosity at 40° C:
–
Ignition point:
DA-10 can be bought at the sales points of
DÜRKOPP ADLER AG under the following parts number:
250-ml-Container:
1-Litre-Container:
2-Litre-Container:
5-Litre-Container:
Lubrication of the button sewing automat
The button sewing automat is equipped with a central oil wick
lubrication. The bearings are supplied by the oil reservoirs 2 and 3.
The oil level must not drop below the red marking of both reservoirs.
–
Fill up oil through the drill-hole 1 up to the red marking of the
reservoir 3.
The reservoir 3 is filled by the overflow of reservoir 2.
10 mm²/s
150° C
9047 000011
9047 000012
9047 000013
9047 000014
1
2
3
37
3