Reference Position - Duerkopp Adler 530 Service Instructions Manual

6.2 Reference position

4 3
34
2 1
Caution: Danger of injury!
Switch off main switch.
Check and adjust reference position with utmost caution when
the button sewing automat is switched on.
Standard checking
The movement of the clamping arm 2 and the rest plate 4 is effected by
two step motors.
The feed plate 5 carries the clamping arm and the rest plate.
–
Press function key "F" when the main menu is displayed.
–
Enter code number "25483".
The display changes over to the technician mode.
–
Activate the menu "Machine configuration" with the key "OK".
Referenz.:
–
Select parameter "Loading position".
–
Select function "B = Machine zero position".
–
Press key "OK".
The button sewing automat positions in the machine zero position.
–
Switch off main switch.
–
Unscrew screws 1 and 3.
–
Take off clamping arm 2 and rest plate 4.
5
cut.rpm
max.rpm
stop pos.
sew.st.pt.
softstart
1
sew.equipment