Using Screen Capture; To Capture A Screen Image; To Recall A Screen Image From Capture Memory - Casio fx-9860G Series User Manual

1-9 Using Screen Capture

Any time while operating the calculator, you can capture an image of the current screen and
save it in capture memory.

To capture a screen image

1. Operate the calculator and display the screen you want to capture.
2. Press !h(CAPTURE).
• This displays a memory area selection dialog box.
3. Input a value from 1 to 20 and then press w.
• This will capture the screen image and save it in capture memory area named
n n
"Capt " (
• You cannot capture the screen image of a message indicating that an operation or data
communication is in progress.
• A memory error will occur if there is not enough room in main memory to store the screen
capture.

To recall a screen image from capture memory

1. In the RUN •
1(RCL).
2. Enter a capture memory number in the range of 1 to 20, and then press w.
• You can also use the RclCapt command in a program to recall a screen image from capture
memory.
Using Screen Capture
= the value you input).
MAT mode (Linear input mode), press
1-9-1
6( )6( )5(CAPT)
20070201