Configuring Range Settings For Graph Data Cells; To Change The Xcellrange And Ycellrange Settings Manually - Casio fx-9860G Series User Manual

k Confi guring Range Settings for Graph Data Cells
The XCellRange and YCellRange settings on the graph settings screen are confi gured
automatically in accordance with the cells you select on the spreadsheet. You can use the
procedure below to change these settings manually, if you want.
Note that the automatic XCellRange and YCellRange settings always specify a series of
lines in a specifi c column. With manual settings, you can specify a series of lines in a specifi c
column, or a series of columns in a specifi c line.

To change the XCellRange and YCellRange settings manually

1. Press 6(SET) on the GRPH submenu to display the graph settings screen.
2. Use the
highlighting to XCellRange.
3. Press 1(CELL) or simply input something.
• Pressing 1(CELL) will display the current XCellRange setting (A3:A5 in this
example) with an input cursor, so you can edit it.
• If you simply input something, the current cell range setting will be replaced by what
you input.
• The function menu will change to the colon (:).
4. Input or edit the cell range.
• To input the colon, press 1(:).
5. After the XCellRange setting is the way you want, press J
YCellRange setting, and then perform steps 3 through 4 to confi gure its setting.
6. After all the settings are the way you want, press J.
Statistical Graphs
and cursor keys to move the
9-6-5
20070201
to move to the