Before Starting Data Communications; Entering The Link Mode; About The Data Type Selection Screen - Casio CFX-9800G Owner's Manual

CEX-9800G
Label Pritner
_ SB-62 cable
*After you finish data communications; switch off power in the sequence: CFX-9800G
first, and then the Label Printer. Finally, disconnect the equipment.
13-4 Before Starting Data Communications
Before actually starting data communications, you should first enter the LINK Mode from
the Main Menu.
@Entering the LINK Mode
Highlight the LINK icon on the Main Menu and press &).
FA(TRN) . Transmit
F2](RCV) . Receive
(Fa)(SET) ... Set up display (page 21).
—322—
Pressing 3 while the above display is shown causes the following function menu to appear.
COMMUNTCAT LON
PARITY "EVEN
' 9668
SELECT OPERATION
El? TRANSMIT
F2:RECEIUE
Fx) {F2)
The following are the operations that can be selected from the function menu at the bot-
tom of the display. Press the function key below the operation you want to perform.
FA(TRN)
(F(RCV)
About the Data Type Selection Screen
Whenever you press (i](TRN) to send data or (F2|(RCV) to receive data, a data type selec-
tion screen appears on the display.
Send Unit —--——-—- | —————- Receive Unit
§(TRN) (RCV)
il RECEIVE DATA
2
. Editor :
Function Mem Function Mem
Matrix | Matrix |
Statistics Statistics
Variable Mem 4 Variable Mem 4
Indicates more below
—323— 2340087-13