To Specify The Number Of Significant Digits; To Specify The Normal Display; To Specify The Engineering Notation Display - Casio fx-9860G Series User Manual

Specifying the Angle Unit and Display Format
To specify the number of signifi cant digits ( Sci)
Example To specify three signifi cant digits
2(Sci)dw
Press the number key that corresponds to the
number of signifi cant digits you want to specify
n
( = 0 to 9).
Specifying 0 makes the number of signifi cant
digits 10.
To specify the normal display ( Norm 1/Norm 2)
Press 3(Norm) to switch between Norm 1 and Norm 2.
Norm 1: 10
Norm 2: 10
Ab/caaw
To specify the engineering notation display ( Eng mode)
Press 4(Eng) to switch between engineering notation and standard notation. The
indicator "/E" is on the display while engineering notation is in effect.
You can use the following symbols to convert values to engineering notation, such as
) → 2k.
3
2,000 (= 2 × 10
E (Exa)
P (Peta)
T (Tera)
G (Giga)
M (Mega)
k (kilo)
# Displayed values are rounded off to the
number of signifi cant digits you specify.
2-3-2
x x
| >10
–2 (0.01)>| |, | 10
x
–9 (0.000000001)>| |, |
× 10
18 m (milli)
× 10 μ (micro)
15
× 10
12 n (nano)
× 10
9
p (pico)
× 10
6
f (femto)
× 10
3
# The engineering symbol that makes the
mantissa a value from 1 to 1000 is automatically
selected by the calculator when engineering
notation is in effect.
20070201
x
| >10
10
(Norm 1)
(Norm 2)
× 10
× 10
× 10
× 10
–12
× 10
–15
–3
–6
–9