Operation Safe-Exit; Operation Home-Safe - Casablanca Bel Air Instructions Manual

OPERATION SAFE-EXIT

NOTE: Both Light-Minder and Safe-Exit programs will always run at the same time.
The Safe-Exit Program gives you about thirty seconds of light when you turn the lights off,
enabling you to exit your home before the lights go out. To enter the Safe-Exit Program:
1) To operate the lights for Safe-Exit Program – Press the
seconds.
2) Turn the Power on. Immediately press the buttons in the following sequence:
+ + . Immediately press the
fan controller. The lights will blink to indicate this command has been accepted. The lights will
stay on for 30 seconds and then begin to dim. After thirty seconds have elapsed, the lights will
turn completely off.
3) To cancel the Safe-Exit Program, press the
NOTE: If the lights are left on in the room, the lights will automatically turn
OFF after 2 hours. ( this is Light-Minder)
The Light-Minder Program automatically turns OFF the fan mounted lights after two hours.
To enter the Light-Minder Program:
1) To operate the lights for Light Minder Program – Press the
least 5 seconds.
2) Turn the on. Immediately press the buttons in the following sequence:
+ +
buzzer indicating the command has been accepted. Once the lights turn on, they will
automatically turn off after 2 hours.
3) Light operation still remains normal, if you leave the room and turn OFF the lights will blink to
indicate this Safe-Exit command has been accepted. The lights will stay on for 30 seconds and
then begin to dim. After thirty seconds have elapsed, the lights will turn completely off.
4) To cancel the Light-Minder and Safe-Exit Programs, press the
The Home-Safe Program makes an unoccupied home appear occupied by turning the lights
on and off at random times.
To enter the Home-Safe Program:
1) To operate the lights and fan for Home Safe Program – Press the
for a least 5 seconds.
2) Turn the on. Immediately press the buttons in the following sequence:
+ +
flashing lights indicating the command has been accepted will follow. This program overrides
all manual control of lights and fan. Once the lights turn on, they will automatically turn off
after 2 hours.
3) The lights will automatically cycle on and off in a controlled sequence as follows: ON 1 hour,
OFF ½ hour, ON 2 hours, OFF 1 hour, ON ½ hour then OFF 2 hours. This seven hour pattern
will repeat continuously so that a different pattern of lighting is seen each day of the week.
4) To cancel the Home-Safe Program, press the
14
3
®
Button after an audio tone is heard from the
+ . A series of tones will be heard through the piezo-

OPERATION HOME-SAFE

. A series of tones will be heard through the piezo-buzzer and
AND LIGHT -MINDER
®
button off for at least five
button off for five seconds.
button off for at
button.
PROGRAM
®
Button off
Button OFF for five seconds.
PROGRAM
®
Safe-Exit
+
Light-Minder
+