Canopy Electrical Connections; Canopy Hatch Installation - Casablanca PANAMA Owner's Manual

Hide thumbs Also See for PANAMA:

Owner's manual (22 pages)

Owner's manual and installation manual (2 pages)

Table Of Contents

Table of Contents

Step 6a. Attach the fan wires to the ceiling ﬁ xture outlet

box wiring by twisting the bare ends of the wires together

and then securing with a wire nut. Test that the connection

is secure by pulling on the wire nut. Connect in this order:

Step 6b. Pull Chain or W-41 Wiring Connections

• GREEN leads from mounting plate and fan to GROUND

conductor of power source. Secure with wire nut.

• WHITE wire from fan to white NEUTRAL wire in ceiling

ﬁ xture outlet box. Secure with wire nut.

• BLUE wire and BLACK power wire from fan to BLACK power

wire in ceiling outlet box. Secure with wire nut.

Step 6c. W-81 Wiring Connections

• GREEN leads from mounting plate and fan to GROUND

conductor of power source. Secure with wire nut.

• WHITE wire from fan to white NEUTRAL wire in ceiling

ﬁ xture outlet box. Secure with wire nut.

• BLACK power wire from fan to RED wire from W-81 in ceil-

ing outlet box. Secure with wire nut.

• BLUE wire from fan to YELLOW wire from W-81 in ceiling

outlet box. Secure with wire nut.

NOTE: See Page 8 for additional wiring information.

Step 7. Tuck the wires into the canopy

with the wire nuts pointed upwards, so

that the WHITE and BLACK wires are on

opposite sides of the canopy and all wires

are clear of the canopy opening.

Step 8. Install canopy hatch with the

last canopy screw and lock washer. To

do this, tilt the fan body away from the

hatch opening.

Tighten the screws ﬁ rmly by hand only,

Step 9. Straighten the fan, then check

to ensure that there is no movement be-

tween the canopy and ceiling or Hang-Tru

ball and top support shaft.

Step 10.

Attach the blades to the blade

holders with the three blade

screws and felt washers provided

for each blade.

Hand tighten securely.

Install the assembled blade and

blade holder to the motor.

Hand tighten securely.

Repeat for each assembly.

WARNING: To reduce the risk of personal injury, do not bend blade holders when installing, bal-

ancing, or cleaning. Do not insert foreign objects between rotating fan blades.

PROCEED TO YOUR FAN'S CONTROL FEATURE SECTION FOR INSTALLATION/OPERATING INSTRUCTIONS: