Casablanca Holliston C31UxxZ Owner's Manual page 34

W- 8 4 Wa l l C o n t r o l B e z e l r e p l a c e m e n t :
Continued
Step 1e. to attach the bezel back on to the front of the
switch you will need to align the four (4) tabs on the bezel
with the front of the wall control and by gently pressing on
both top and bottom of the bezel at the same time, snap
the bezel back on to the front of the switch as shown in
both figures #6.
Step 1f. Re-attach the wall plate using the two (2) almond
screws as shown in Figure #7. Check your work by
pressing on the light, fan, reverse and power buttons,
making sure that the buttons do not stick and that each
switch functions properly. turn the power back oN and
test the fan and lights.
32
-
WaLL PLate
aLMond
CoLoRed
BeZeL
aLMond
CoLoRed
WaLL PLate
BeZeL
BeZeL
taBS
BeZeL
aLiGnMent
Pin and hoLe
Figure #6
aLMond
SCReWS
Figure #7