Casablanca Holliston C31UxxZ Owner's Manual page 25

3
®
rUBBer keY
Pad
Prepare for W-84 Wall Control installation -
Continued
Step 1d. Before attaching the bezel back on to the
front of the switch, make sure that the rubber key
LoCatinG
aLMond
pad is attached to the locating pins on the bezel as PinS
BeZeL
(4)
shown in Figure #4.
Figure #4
aLMond
BeZeL
Step 1e. to attach the bezel back onto the front of the
BeZeL
switch you will need to align the four (4) tabs on the
taBS
bezel with the front of the wall control.Gently press
on both top and button of the bezel at the same time,
snap the bezel back on to the front of the switch as
shown in both figures #5 and #6.
BeZeL
aLiGnMent
Pin and hoLe
Figure #5
aLMond
BeZeL
Step 1f. Check your work by pressing on the light,
fan, reverse and power buttons, making sure that the
buttons do not stick and that each switch functions
properly. BeZeL
taBS
Figure #6
23