Sewing - DURKOPP ADLER 381 Operating Instructions Manual

8. Sewing

The description of sewing assumes the following preconditions:
–
The following functions are set at the control panel:
Beginning bartack: ON
Sewing foot position before and after trimming:
Needle position before trimming:
–
Main switch turned on.
–
The last sewing procedure was completed with end bartack and thread trimming.
Operation and function sequence during sewing:
Sewing procedure
Before the sewing start
Initial position
Position the material at the
seam beginning
At the seam beginning
Beginning bartack and
continue sewing
Beginning bartack is not to be
sewn
28
End bartack: ON
1 2
Operation / Remarks
- Pedal in rest position.
Sewing machine is idle.
Needle up. Sewing feet down.
- Step back on the pedal.
The sewing feet rise.
- Position the material.
- Release the pedal.
The sewing feet lower onto the material.
- Step forward on the pedal and hold down.
The beginning bartack is sewn.
Subsequently the machine continues
sewing at the speed determined with the pedal.
- Press key 3 (bartack suppression).
- Step forward on the pedal.
- The machine sews at the speed determined
with the pedal.
LOW
LOW (position 1)
3 4