Roller Top Feed - DURKOPP ADLER 381 Operating Instructions Manual

6.14 Roller Top Feed

1
3
The feed distance of the roller top feed is a max. 7 mm.
It can be set differently than the bottom feed with the setting dial 2.
The feed roller 3 is automatically lowered after 10 stitches. The number of stitches prior
to the automatic lowering of the feed roller can be set with parameter F-186 (technician
level).
The feed roller 3 is automatically raised during lifting of the sewing foot and at seam
bartacking.
–
Hand lever 1 up:
The feed roller with drive is completely swung out of the work area. The roller top
feed (puller) has no function.
Hand lever 1 down:
The puller is swung into the work area.
–
Operate switch 4:
The feed roller is raised or lowered.
LED 5 ON = Feed roller raised.
LED 5 OFF = Feed roller lowered.
–
Set the setting dial 2.
The feed distance of the roller top feed can be set independent of the bottom feed.
22
2
4
5
4