Printable Area - Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual

EPSON Stylus Pro 3800/3800C/3850

1.3.4 Printable Area

Item
PW (paper width) 89mm to 431.8mm
PL (paper length) 127mm to 950mm
TM (top margin) 0mm/3mm/20mm*
BM (bottom margin) 0mm/3mm/20mm*
LM (left margin) 0mm/3mm
RM (right margin) 0mm/3mm
Note *: TM and BM are fixed to 20 mm in front manual feeding.
† The printer detects the paper width when paper is set. (If the paper width detection
setting is OFF, the printer does not detect the paper width.)
† The printer does not print the image exceeding the detected paper width and the
printable area that is specified in the paper setting. (If the paper width detection
setting is OFF, the printer may print on the platen.)
† The top/bottom/left/right margins (TM, BM, LM, RM) can be set to zero under
special conditions.
† Because the printer detects tilt of loaded paper in a range of 3 mm at both left and
right sides, an image bleeds off both left and right edges of paper by 3 mm each at
borderless printing. However, if the distance between the paper edges and the
platen (sponge width) is less than 3 mm, the bleeding margins are adjusted to less
than 3 mm (within the range of 0 mm a 3 mm) not to directly print on the platen.
(Refer to "1.4.2 Borderless Printing"
PRODUCT DESCRIPTION
Dimension
(p17), for the borderless print specification.)
Printing Specifications
PW
LM
Printable Area
Figure 1-3. Printable Area
Revision A
RM
TM
PL
BM
16