Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual page 166

EPSON Stylus Pro 3800/3800C/3850
5. Lift up the left side of the main frame, and remove the SPUR GEAR, 31.5 and the
COMPRESSION, SPRING, 2.25 from the main frame.
6. Remove the TIMING BELT, PF from the pinion gear and the COMBINATION
GEAR, PF, DRIVE of the MOTOR ASSY., PF.
See Figure 4-101.
Whenever the TIMING BELT, PF is replaced,
the corresponding adjustments must be carried out.
"ADJUSTMENT"
See Chapter 5
DISASSEMBLY & ASSEMBLY
See Figure 4-100.
(p190).
Disassembly/Assembly Procedure (Group 1)
Left side
Figure 4-100. Removing the SUPUR GEAR, 31.5 (2)
TIMING BELT, PF
pinion gear
(MOTOR ASSY., PF)
Figure 4-101. Removing the TIMING BELT, PF
Revision A
COMPRESSION,
SPRING, 2.25
SPUR GEAR, 31.5
COMBINATION GEAR, PF, DRIVE
166