Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual page 104

EPSON Stylus Pro 3800/3800C/3850
4.3.3.10 HOUSING, FRONT, UPPER
1. Remove the HOUSING, REAR, ASSY.
2. Remove the HOUSING, FRONT, LEFT.
3. Remove the HOUSING, FRONT, RIGHT.
4. Remove the COVER, PRINTER.
5. Remove the HOUSING, LEFT.
6. Remove the HOUSING, RIGHT.
7. Remove the five screws that secure the HOUSING, FRONT, UPPER and remove it.
„
Two C.B.P. 3 x 8 screws (6 ± 1 kgf.cm)
„
Two Shaft, Mount, Plates (9 ± 1 kgf.cm)
„
One C.B.S. 3 x 8 screw (9 ± 1 kgf.cm)
DISASSEMBLY & ASSEMBLY
(p95)
(p97)
(p98)
(p99)
(p102)
(p103)
Disassembly/Assembly Procedure (Group 1)
C.B.P. 3x8
HOUSING, FRONT,
UPPER
Shaft, Mount, Plates
Figure 4-16. Removing the HOUSING, FRONT, UPPER
Revision A
C.B.P. 3x8
C.B.S. 3x8
104