Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual page 160

EPSON Stylus Pro 3800/3800C/3850
6. Slide the GUIDE, TUBE, CR in the direction of the arrow to release the hooks
from the three guide pins on the CARRIAGE, ASSY., and remove it.
4-91.
7. Remove the three screws that secure the LEAF SPRING, LOCK, HEAD, and
remove it upward. See Figure 4-92.
„
Three C.B.P. 2.5 x 8 screws (3 ± 0.5 kgf.cm)
Put the far left section of the LEAF SPRING, LOCK, HEAD under
the HARNESS, HEAD, A/B and the film, to install it.
HARNESS, HEAD, A/B
and film
DISASSEMBLY & ASSEMBLY
See Figure
Disassembly/Assembly Procedure (Group 1)
CARRIAGE, ASSY.
guide pins
Figure 4-91. Releasing the GUIDE, TUBE, CR
C.B.P. 2.5x8
Figure 4-92. Removing the LEAF SPRING, LOCK, HEAD
Revision A
GUIDE, TUBE, CR
LEAF SPRING,
LOCK, HEAD
C.B.P. 2.5x8
160