Epson 3800 - Stylus Pro Color Inkjet Printer Service Manual page 78

EPSON Stylus Pro 3800/3800C/3850
Error Code Error Name
1410 Drive time monitor time-out (PUMP)
142D Pump cap unit life error
1425 CSIC communication time-out
1430 Holder ink pad error
1431 Ink selector error
1432 Ink selector drive timeover
1434 Ink cover unlock error
1501 Release phase detection error
1502 Drive time monitor time-out
TROUBLE SHOOTING
Description
The Pump motor run away out of control.
The pump counter has reached its upper limit.
The printer cannot read/write data from/into the CSIC of the ink
cartridge or the maintenance cartridge.
The ink cartridge installation/removal counter has reached the
specified limit.
The number of drives of the Ink Selector has reached the specified
limit.
Changing the ink path by the Ink Selector cannot be completed
during a predetermined time period due to a malfunction of the
Ink Selector (its sensor or motor).
The cartridge cover cannot open due to an obstruction on the top
of it.
The ink cover open sensor is broken and cannot detect an open/
close status of the cover.
The ink cover solenoid is broken and cannot unlock the cover.
The release roller position sensor cannot detect the actuator after
the release motor has driven a predetermined number of steps.
The condition to stop the release motor are not satisfied when the
release motor has driven for a predetermined time period.
Remedies for Service Call Error
Remedy
Turn the printer power On and Off.
Replace the main board (BOARD ASSY., MAIN).
See 4.3.4.1 BOARD ASSY., MAIN on page 112.
Replace the Pump Cap Unit (PUMP, CAP, ASSY), and reset the
counter using the Adjustment Program.
See 4.3.9.1 PUMP, CAP ASSY. on page 148.
Check the connection between the CSIC and the main board and
fix any abnormality.
Replace the ink cartridge or the maintenance cartridge.
Replace the main board (BOARD ASSY., MAIN).
See 4.3.4.1 BOARD ASSY., MAIN on page 112.
Replace the ink pad in the holder (POROUS PAD,TRAY,INK
EJECT) and reset the counter using the Adjustment Program.
See 4.3.9.4 POROUS PAD, TRAY, INK EJECT on page 158.
Replace the Ink Selector (INK, SYSTEM, ASSY.) and reset the
counter using the Adjustment Program.
See 4.3.9.3 INK, SYSTEM, ASSY. on page 151.
Replace the Ink Selector (INK, SYSTEM, ASSY.) and reset the
counter using the Adjustment Program.
See 4.3.9.3 INK, SYSTEM, ASSY. on page 151.
Remove any obstruction on the cover.
Replace the ink cover Open sensor.
See 4.3.6.1 LOCK, COVER, ASSY. on page 123.
Replace the ink cover solenoid.
See 4.3.6.1 LOCK, COVER, ASSY. on page 123.
Replace the release motor (MOTOR, RELEASE, ASSY).
See 4.3.10.3 MOTOR, RELEASE, ASSY. on page 167.
Replace the release roller position sensor (Release Sensor).
See 4.3.6.3 RELEASE SENSOR on page 127.
Replace the release roller position sensor (Release Sensor).
See 4.3.6.3 RELEASE SENSOR on page 127.
Replace the release motor (MOTOR, RELEASE, ASSY).
See 4.3.10.3 MOTOR, RELEASE, ASSY. on page 167.
Revision A
78