Front End Position - Beisler 100/68 Operating Instructions Manual

2.2

Front end position

325 mm
8
1
Standard and checking
The switch 1 determines the front end position of the transport
carriage.
It must be set in such a way that there is a distance of 325 mm
between the needles and the fronts of the transport clamps when they
have moved to the front.
When the transport carriage is in its front end position, there must be a
distance of 1 mm between the limit switch 1 and the switching screw 4.
When the transport carriage has moved forward so far that the
switching screw 4 stands centrically under the switch 1, there must be
a distance of 2 mm between the transport carriage 7 and the stop 6.
Caution: Risk of injury!
Switch the main switch off.
Check and adjust the switch and the stop for the front end position of
the transport carriage only with the sewing unit switched off.
4 3
7 6
1 2
5