Table of Contents
Advertisement
Execution of horizontal tab/HT
[ASCII]
[Decimal]
[Hexadecimal]
[Description]
● Shifts the print position to the next horizontal tab position.
● When HT code is set in an unspecified area (when it is set beyond the last tab position in a line), the input
will be ignored.
● Immediately after power-ON, horizontal tab positions of a size of 10CPI are set every 8 columns.
● Given horizontal tab positions can be set by ESC D code.
● When underline is specified, the underline will not be drawn at a moving area of HT.
● When image generation speed is set to fast, if you use Horizontal Tab (HT) and Alignment Command (ESC a) at the
same time, the function of Horizontal Tab (HT) will not be available.
HT
9
09
- 65 -
Advertisement
Table of Contents
