Table of Contents
Advertisement
Aligning the characters/ESC a
[ASCII]
[Decimal]
[Hexadecimal]
[Parameter]
[Description]
● Selects the aligning of characters.
● Performs the aligning of characters by "n" value.
When n=0, left end alignment is performed (default).
When n=1, centering is performed.
When n=2, right end alignment is performed.
When n=3, even alignment is performed.
● Default is n=0
● Position alignment is executed between right and left margins when CR, LF, or FF code is entered or buffer-full printing
is executed.
● Specifies position alignment at the head of a line.
● BS and DEL codes will be ignored.
● When 'n' = 1 or 2, HT, ESC $ and ESC ¥ codes will be ignored. When 'n' = 3, character data after these
codes will be full-justified.
● The range of printing length to which full justification can be applied (in one line) is 75 to 125% of the
length between the right and left margins. Print position is determined by adjustment of space width.
●When image generation speed is set to fast, full adjustment in case of 'n' = 3 does not function.
ESC
a
n
27
97
n
1B
61
n
n = 0, 1, 2, 3
87
Left end alignment
Centering
Right end alignment
Even alignment
Advertisement
Table of Contents
