Table of Contents
Advertisement
Setting the black mark detection:n=8
●
enabling/disabling of
Sets the
detection will be executed during auto feeding as well.
m=0: disabled
m=1: enabled
Setting the character set.: n=9
● Sets the default character set.
m=1: Graphic character code
m=2: Italic code
Setting the international characters: n=10
● Sets the default setting of international character
m=0: Japan
1: USA
2: France
3: Germany
4: England
5: Denmark
6: Sweden
7: Italy
8: Spain
9: Norway
10: Denmark2
11: Spain2
12: LatinAmerica
13: Korea
14: Legal
Setting the character pitch: n=12
● Sets the default setting of character pitch.
m= 0: 10 cpi or equivalent
1: 12 CPI equivalent
2: 15 CPI equivalent
3:
Proportional
4: 17 CPI equivalent
5: 20 CPI equivalent
Setting the auto power OFF time.: n=13
● Sets the auto power OFF time.
m=0 : auto power OFF disabled
1~255 : 1~255 minutes.
Setting the return control of printer status: n=14
● Sets the enabling/disabling of the return control of printer status. Sends the return control of printer
status to FS G, ESC~Y when it is enabled.
m=0: disabled
If auto feed setting is set to enable at the same time, mark
Marker detection.
49
Advertisement
Table of Contents
