Table of Contents
Advertisement
● s: Size of character-string data repetition
Example) When s = 3:
● Division mode 1 and division mode 2 can be specified in QR division mode of the internal setting menu. Use division
mode 1 when the user divides data in advance before sending the data. In such cases, the printer only symbolizes this
data and information of a given code number. Use division mode 2 when dividing operation is left to the printer. The
printer divides and symbolizes the given data in the printer at the same time based on the code number specification of
the code number and information of the dividing number specification. Note that, in either mode, the parity value of all
data must be always specified for parity data. Especially in division mode 1, where the user divides data, the parity code
reader will fail to combine QR codes unless the parity value of all data before data are divided is set for parity data.
● Choose an appropriate error correction level in accordance with the use environment. When using the
printer in an environment where printed QR codes may easily get dirty, you can improve the reading ratio
of the barcode reader by employing a higher error correction level.
● Use a mask number in such cases that reading is adversely affected by, for example, uneven symbols or a
pattern similar to the position detection pattern at a state where symbol data are allocated. Auto selction is
normally acceptable.
3 <t + data + NUL > <t + data + NUL > <t + data + NUL>
30
Advertisement
Table of Contents
