Table of Contents
Advertisement
Setting the inside of printer/ESC~SI
[ASCII]
[Decimal]
[Hexadecimal]
[Parameter]
[Description]
● Sets the internal setting of the printer.
● Set the factory setting (ESC~SF), and default value (ESC~SL) before using the command.
ESC~SL ←Reads the default setting value
ESC~SI ←Sets the internal setting of the printer
ESC~SI ←Sets the internal setting of the printer
ESC~SI ←Sets the internal setting of the printer
ESC~SS ←Writes the setting for flash memory
● n=0 : Sets the serial interface communication speed.
1: Sets the serial interface data length.
2: Sets the serial interface stop bit length.
3: Sets the serial interface parity bit.
4: Sets the serial interface flow control.
5: Sets the printing density
6: Sets the type of printing paper
7: Sets the operation for automatic feed
8: Sets the black mark detection
9: Sets the character set.
10: Sets the international character set.
12: Sets the character pitch..
13: Sets the auto power OFF.time.
14: Setting the return control of printer status.
16: Selects the font style.
16: Sets the code page.
20: Sets the IrCZ infrared communication speed
21: Sets the IrCZ infrared stop bit length
23: Sets the Link off
24: Sets the recharging of the main unit
25: Sets the Bluetooth communication mode
26: Sets the Bluetooth BOND history deletion
27: Sets the QR code division mode
28: Sets the type of interface
29: Sets the Cable auto recognition mode
255: Sets the printing of printer's internal setting
ESC
~
S
27
126
83
1B
7E
53
n: Setting category
m: Setting value by category
I
n
m
73
n
m
49
n
m
47
Advertisement
Table of Contents
