Advertisement
(36) Printing Download Bit Image (GS /
Code : [1D]h + [2F]h + m
* {0 m 3}
Prints download bit iamges in a mode specified by m.
Modes can be selected by m are shown in table for selection with m are shown below.
m
0
1
Double wide mode
2
Double high mode
3
Double wide/double high mode
When data exist inside the print buffer, this command is ignored.
When a download bit image has not been defined, this command is ignored.
A portion of a download bit image exceeding one line length is not printed.
A download character and a download bit image cannot be defined simultaneously.
(37) Starting / Ending Macro Definition
Code : [1D]h + [3A]h
Specifying starting / ending macro definition.
bytes. A portion exceeding 2048 bytes is not defined.
Even with ESC @ (initialization of the printer) having been executed, defined content is not cleared.
Therefore, it is possible to include ESC @ into the content of macro definition.
Normal printing operation is carried out even while in macro definition
(38) Macro Execution
Code : [1D]h + [5E]h + n1 + n2 + n3
* {0 n1 FF}
{0 n2 FF}
{0 3 1}
Executing contents defined in macro.
"n1 - n3" indicate as follows:
n1
: The number of times of macro execution
n2
: Waiting time on macro execution
Waiting time of n2 x 100 msec is given for every execution.
n3
: Macro execution mode
n3
0
1
m)
Data is described in Hex code.
MODE NAME
Normal mode
(GS :)
(GS ^ n1
n2
n3)
Data is described in Hex code.
Mode
Continuous execution
Execution by LF SW
DOT DENSITY IN
VERTICAL DIRECTION
203 DPI
203 DPI
101 DPI
101 DPI
Maximum content available for macro definition is 2048
38
CBM-290/291 User's Manual
DOT DENSITY IN
HORIZONTAL DIRECTION
203 DPI
101 DPI
203 DPI
101 DPI
CITIZEN
Advertisement
